Tailings Treatment

Description of Tailings Treatment System Tailings is the waste produced in the process of mineral processing. As the main component of industrial solid waste, its treatment and comprehensive utilization have attracted wide attention of the whole soci...

Description of Tailings Treatment System

Tailings is the waste produced in the process of mineral processing. As the main component of industrial solid waste, its treatment and comprehensive utilization have attracted wide attention of the whole society. Sludge water in tailings not only occupies a lot of land resources, but also may cause serious pollution to the groundwater layer. Therefore, how to deal with sludge water in an efficient and environmentally friendly manner has become an urgent problem for the industry. In response to this problem, Black Rhino has specially developed a horizontal spiral centrifuge, which has performed well in the field of tailings sludge water treatment and has achieved remarkable results in market practice.

Tailings treatment challenges and solutions

The difficulty of tailing sludge water treatment lies in its high solid content, complex composition and high pollution risk to the environment. Traditional treatment methods are often inefficient, costly, and difficult to achieve effective recovery of resources. The horizontal spiral centrifuge developed by Black Rhino can efficiently separate the solid and liquid phases in tailings, not only reducing the volume of waste, but also achieving the recycling of water resources and significantly reducing the negative impact on the environment.

Schematic diagram of the KS-MST80 tailings treatment system process.jpg

Tailings treatment process:

Tailings treatment mainly adopts the process of screening and centrifugal dehydration and dry discharge. Tailings are transported to the screening equipment by slurry pump through the buffer tank, and then pumped into the high-speed variable frequency decanter centrifuge. After centrifuge high-speed separation, the liquid phase is all returned to grinding and grading operation for reuse, while the solid phase is transported by belt conveyor to the tailings pond for dry layering, so as to ensure the long-term safety of the tailings pond.